TUTORIAL: How to flash the Imax B6 Charger to get the Calibration Menu 1 Back

Bevore you do anything i recommend to read the thread on RC Groups:

http://www.rcgroups.com/forums/showthread.php?t=827821

Read the Description Carfully! You do all at your own risk!

This Video show how to Flash the Imax B6 Charger to get the Menu 1 (Stop and Incrase Button Press/Hold at Start up) Back to Calibrate the Individual Cell Voltage of the Imax B6

The Informations in the Video came mostly from RC Grous Thread:

http://www.rcgroups.com/forums/showthread.php?t=827821&page=12 start from Post 177

Also the Hex File: (you need to Register before you can Download)

http://www.rcgroups.com/forums/showatt.php?attachmentid=3730087&d=1295127628

The AVR Tools for Mac
http://www.w7ay.net/site/Applications/AVR%20Tools/index.html

To Calibrate you need a 6S Lipo with 25.2 Volt (Full Charged each Cell to 4.2 Volts).

All this you can also Read at the RC Groups Thread

Or you make a tool like this one:

http://www.rcgroups.com/forums/showpost.php?p=17113662&postcount=176

Also read my Blog: https://ripcurl777.wordpress.com

YOU DO THIS MODIFICATION AND FLASHING AT YOUR OWN RISK!
YOU NEED TO KNOW WHAT YOU DO, ESPECIALLY IN THE CASE OF AN IMAX B6 AC WICH USES
A POWERSUPPLY WITH HIGH VOLTAGE!!! THIS CAN HARM OR EVEN KILL YOU!! THERE IS NO WARRANTY FOR THESE BINARY FILES, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND ALL OTHER PARTIES PROVIDE THE BINARY “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE BINARY IS WITH YOU. SHOULD THE BINARY DIFFER OR CONTAIN ANY DEFECT, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.

Two new Videos about Turnigy Accucel 6 Charger

Well, after coming home from work, i want to charge my Lipos. And then i thought.. Well, the Accucel 6 has a Calibration Menu again, i should share this. Now you need to know that there are several Videos and Post about the new Version of Accucel 6 having no calibration menu. But well.. surprisingly it has one. 

After that Vid… there was another idea, show how to go from LiPo mode to LiFe and LiIo, well done, here are the two Videos:

LITTLE REVIEW: 9XR and LiPo/LiFe Battery

Some thoughts about Battery for the 9XR.

The Battery used is a 3Cell LiFe and not 2Cell like i said wrong in the vid! Sorry

LiFe:
http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=17955&aff=236247

9XR:
Mode2: http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=31544&aff=236247

Mode 1: http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=28297&aff=236247